Engine Compartment Temperature

[Joel Oswald]

Howdy,

The Dynmat costs approx in NZ $390 for the Bulk Kit which contains Nine 18" x 32" pieces of Dynamat Xtreme... You can buy it in smaller sized kits, i.e. door kits, trunk kits etc.
From memory I used 2 x Bulk kits & about 4 trunk kits, which are 5 pieces in each. Worked out slightly cheaper.

Joel

[doofhard]

Joel you must be getting sick of playing with that Bedford, maybe you should give it to me

[Tweaker]

hey Joel
I know that you've got your starting battery in the front, but is there anychance you could post a pick of your starter motor wired up for me? The rest of your van looks awesome so I suspect it will here also. I've been banging my head against the floor of the van trying to find a new route that I'm happy with.

[obsession]

Joel you must be getting sick of playing with that Bedford, maybe you should give it to me

 
line up your behind me..lol

[doofhard]

Hey i'm in Melbourne so it may as well have a bit of a play on it's way

[Joel Oswald]

Not getting sick of it yet Fellas... Though I wanna be able to drive the bloody thing... Getting there though. Dash/IGN Wiring is about 60-70% complete...!

Tweaker, I can do that. I'll have a look though my progress photos so far to see if there's anything that show the starter motor & the cable leading to it. I basicaly have the thicker cable going through a hole up the front, down on the lip of the front subframe itself, using P clips riveted on.
I'll take a photo if I can't find one.

Joel

[Joel Oswald]

I have added some photo's to my gallery for you Tweaker.... Last 6 photos. Some of them aren't great, but you should get the idea of what I did.
Shows the route of the main pos+ cable along the lower lip of the subframe. The earth cable is one of the last few shots, 86, shows where that goes. I also have another earth cable from the back of the trans to the drive shaft loop/body underneath...

Joel

[Tweaker]

Cheers Joel your a champ! I'll check em out now.