"JAG IT!"

[petrolhead]

Check these out from K&K crossmembers in Qld. You can order them to suit any track width(what's a Beddie?) they accept Jag components and come with a engineers certificate

[petrolhead]

The bare crossmember is $750.00 inc. postage and the coil over shocks are$650.00
Regards
Petrolhead

[Merlin]

careful with those crossmembers guys they are set up parallel and as the jag is set up with sweeping arms (for anti dive /squat characteristics ) the third arms (at the stubs) are shorter and they will foul the lower control arms .the only solution is to fit steering stops limiting the turning circle (just the thing for beddies) I have invested over 350 hours in r&d on my Jag/Bedford f/ends and it has come down to manufacturing longer third arms which will be an expensive engineering nightmare    Cheers Neil

[ben]

hey merlin dont you wish we were machines, so we could just charge battery while still working:) i do anyway.

[vanner065]

heres a pic of my Jag rear, still uses the original cage. It was the first Bedford in Australia to get the jag rear, was done in the late 1970's
[