wheel off set for 15x10

[project cf]

hi every one i need to no wat negative offset a 15x10 wheel has on a beddy or wat i can use

[bed767]

bed767 here   I run a standard holden one tonner diff. with standard american racing 15x10 mags with 275 /60x15 tyres on my standard cfs bedford. The mags are standard holden hq offset ,i.e.3 3/4 inches.This gives about 1/2 inch clearance from the standard spring set up. Been this set up for 24 years with no scrape broblems at all.
   cheers  Brian

[rossie]

hey bed767, project cf proberbly wont know what a hq is, as his from the uk
take your wheel off and run a flat edge across your brake drum, then measure from the flat edge to the nearest object, being spring hanger or inner wheel arch... hope this helps cos it realy does relate to what diff you have

[ben]

for the front its 125mm offset back space

for the back i have 200mm but if you have a standard diff width use same offset as front.

depends on what diff you have.

i have a chev impala diff which is real wide then deep dish rims as well and the rims sit right to the edge of flares

ben

[project cf]

thanks for that been a big help cf project uk vanners

[bed767]

bed767 again     sorry!  drum face to drum face holden hq is 1568m.m.