User Info
Who's Online
Recent Topics
CF 350 Breaks conversion by greasey monkey
[November 19, 2024, 10:28:23 PM]
Cf Bedford for sale by Gunning
[August 26, 2024, 06:54:11 PM]
Advise on raising the rear end of a CF350 Motorhome. About 3.5T by johnxb351
[August 09, 2024, 08:17:08 AM]
Sale of 1977 Bedford Motorhome by johnxb351
[August 06, 2024, 08:27:12 PM]
173 extractors by kylee dingo
[April 07, 2024, 02:55:17 PM]
lowering my bedford cf by Ratbox
[October 07, 2023, 07:59:56 PM]
Adjustable Upper Control Arms by Saville
[August 22, 2023, 11:35:43 AM]
202 red to 202 black Carby engine by johnxb351
[June 21, 2023, 06:33:35 PM]
CF CLUTCH PEDAL by johnxb351
[June 18, 2023, 02:58:15 PM]
Royal Bedford by wendyh
[October 16, 2022, 03:40:43 PM]
|
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - stuey
1
« on: November 04, 2014, 09:12:03 AM »
Hi Gary, Where is your mates tire shop??
2
« on: October 31, 2014, 04:11:48 AM »
Thanks Garry, Will i have to find a specialist to do this or will any tire shop be able to do it?? I've had spacers made to center the wheels and it makes quite a bit of difference if i move the wheel around one stud, if you know what i mean?
3
« on: October 30, 2014, 04:07:58 AM »
Awesome guys, looks like i'm going to be busy this weekend, underneath my Beddy!!  I'll let you know how it goes.
4
« on: October 29, 2014, 01:42:48 PM »
Thanks for that guys, but i've already had the wheels balanced(a couple of times) and the shocks were installed not long ago(4-6 months ago).
I've already got bushes and ball joints ready for a long weekend of messing around with the front end and with the wheels off i can visibly notice the drums aren't true yet i dont seem to have any pulsing in the brake pedal. I'll wait until i have some jumbo springs to fit then do the lot, hopefully i'll either get the drums machined or ill find some good second hand ones.
Stuey.
5
« on: October 29, 2014, 09:30:02 AM »
Hi guys, just wondering if anyone has experienced bit of a shimmy in the front end at about 100kmh, i've had a look at the front hubs and drums and it looks like the drums aren't perfect in the round depatrment  short of getting them machined(which i can get done at work) i'll have to opt for finding new ones, i dont think i want to go the way of disc conversion as the van is on declaration and i'd probably have to cert the whole thing!  I will also be replacing all bushings and springs on the front end soon. Any thoughts? Thanks. Stuey.
6
« on: April 17, 2011, 07:54:16 PM »
funny enough they actually run thru the same curcuit, I have just spent last night refitting a new fuse box and correcting everything, so far so good BUT at the mo mine's doing the exact same thing...........I think it could be related to indicators, fuel earth (tank) Iv'e read over the last couple of days My plan is to sort it today will let you know. I don't think it can be a bulb as my hazards are fine, but i have no lh rear indicator and number plate light...... it's all related somewhere.
Dano
Dano, let me know how you get on, i might just go through all my connections on my lights and renew them, may help as i had a dodgy RH tail light and front parking light, cleaned up the connection on the tail and my park light started to work  Gremlins 
7
« on: April 17, 2011, 07:45:56 PM »
These Turbo's will be going on my van as soon as i get some rubber for them, cant wait 
8
« on: April 12, 2011, 06:31:51 PM »
The faults have been like this since i got her in december, but as she was being used over summer i didnt want to start playin with the electrics, will have a look at the basics as advised but if it gets too deep will take the advice and see an auto elec.
Thanks for the info.
Stuey.
9
« on: April 11, 2011, 08:23:56 PM »
Hi guys, Wonderin if you could help as i'm not too good with electrics, when i turn on my indicators both indicator lights on the dash flash and my fuel guage starts to swing in time with the flasher is this just a bad earth or is something else causing this Would appreciate any info, thanks. Stuey. 
10
« on: April 03, 2011, 06:49:22 PM »
|
Guests: 114
Hidden: 0
Users: 0
Show Posts
