User Info
Who's Online
Recent Topics
Cf Bedford for sale by Gunning
[August 26, 2024, 06:54:11 PM]
Advise on raising the rear end of a CF350 Motorhome. About 3.5T by johnxb351
[August 09, 2024, 08:17:08 AM]
Sale of 1977 Bedford Motorhome by johnxb351
[August 06, 2024, 08:27:12 PM]
CF 350 Breaks conversion by johnxb351
[August 06, 2024, 08:24:06 PM]
173 extractors by kylee dingo
[April 07, 2024, 02:55:17 PM]
lowering my bedford cf by Ratbox
[October 07, 2023, 07:59:56 PM]
Adjustable Upper Control Arms by Saville
[August 22, 2023, 11:35:43 AM]
202 red to 202 black Carby engine by johnxb351
[June 21, 2023, 06:33:35 PM]
CF CLUTCH PEDAL by johnxb351
[June 18, 2023, 02:58:15 PM]
Royal Bedford by wendyh
[October 16, 2022, 03:40:43 PM]
|
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Abdu
Pages: [1]
1
« on: March 22, 2015, 04:26:12 PM »
I have just had my brake booster overhauled at the local brake repairer no problem, I have an original 74 Bedford CF.
2
« on: January 30, 2015, 03:07:41 PM »
Hi Chucky, I have used a guy in logan before, but i dont know if he is still in the business, info as follows.
Bedford Parts
Robert Ross.
Mob: 0402989175
Ph: 07 33881081
Good luck
Abdu.
3
« on: June 18, 2013, 03:14:18 PM »
Thanks for the reply, I have taken my one off to see if it can be repaired, I will ley you know if I stil want it. many thanks.
Abdu.
4
« on: June 15, 2013, 02:45:21 PM »
Do you still have the brake booster and master cylinder, I need one for my 1974 bedford cf, imported model, thanks
abdu,
5
« on: June 08, 2013, 04:00:23 PM »
I Had my original radiator recored to a triple core and it works very well, i also fitted a shroud over the rad to increase effeciency.
6
« on: May 22, 2011, 11:38:06 AM »
First off check and see if its got any oil in it, if not put some in and see what happens.
Warren
Further to this, as finding other diffs for beddies can be difficult, its better to work with what youve got, borge warner spares should be easy to find so getting yours adjusted or rebuilt could be the go.
Warren I know of three diffs in brisbane, all high ratio, one is original '74 bedford diff from UK ( which i brought with me) is suited for the 2.3 vauxhall 4 cylider engine. 2 is high ratio diff, which I have recently removed the axles due to a bearing problem, 3 is a high ratio diff, but has had the axle housing modified the suit the bedford, i believe they may be ford diffs.
If there is any interest in these p[ls advise.
7
« on: February 11, 2011, 03:16:12 PM »
Thanks guys Ive already stripped it and greased it but it is still very noisy, I was hoping for a good replacement.
8
« on: February 11, 2011, 03:14:32 PM »
i think id still have one but you can fix yours. pull it apart and grease up the bearing the back it will go again for another while. till it seizes up again.
ben
Thanks guys Ive already stripped it and geased it but it is still noisy, i was hoping for a replacement
9
« on: February 06, 2011, 11:49:57 AM »
I am looking for the above as my original motor has died, it has the three mounting brackets welded to the motor case, or does anyone know of an alternative.
10
« on: April 09, 2010, 02:25:09 PM »
You can start your own thread in this section.
Tell us a little about yourself and your van.
Craig
I have a 1974 bedford CF Autohome built by CI (UK), bought in 1975 in Saudi arabia 1975, drove back to UK in 1976 Via syria, Jordan, Turkey, Greece, italy, switzerland, belgium, holland and on to UK, shipped to Aus' when we emigrated, used eversince, upgraded motor to Holden 202, auto g/box, alloy wheels, high ratio diff, renovated 2004 added 240 volt power and sunshade. My wife and i use the autohome on a regular basis.
Pages: [1]
|
Guests: 33
Hidden: 0
Users: 0
Show Posts