BUGA Community
General Category => CF Bedford Chat => Topic started by: Jordan on April 19, 2009, 10:27:39 PM
-
Hi everyone,
My name is Jordan, have recently bought a CF long wheel base beddy in classic lime green acrylic. Haven't started to restore it yet but I am getting parts together for when i can start, just have to finish building a house so I have a garage to work on the stallion.
I am looking at purchasing a 9" diff at the moment because most of the driving will be on the highway as i'm planning to deck it out as a camper. The ratio of this diff is about 3.86:1 or pretty close to it (think that's how you say it). Just wondering if anyone could give me some advice as to what kind of price is reasonable to offer and if this ratio woud be good for high way cruising, bout 110 kph, my CF has a red 202 and a 3 speed auto. This diff was behind a 308 if that makes any difference and it is a complete rear axle set up with the dual wheels etc all attached, no springs though.
Any advice would be really appreciated.
thanks.
-
id offer him $500.. then work your way up to a price he is happy with..
to give you an idea. to get this conversion done professionally $4,500 is cheap..
cheers
ben
-
Hi Jordan...Welcome to the bugger website.That diff sounds like a good idea,especially with that ratio. Should be good for hwy cruzing.!If you are building your house make sure you get the biggest garage you can. Beddies take up alot of room!!! ;D cheers...johnno
-
Hey Ben and Johnno,
thanks for the reply, i'm gonna go check it on saturday $500 sounds like a reasonable starter.
the garage is plenty big enough for the beddy, it was actually a consideration when working out how high and wide to make the garage. It's funny how these vehicles become part of your life, i've been looking for a new rental lately until the house is built and looked at heaps until I found one that had a garage big enough for the van.
cheers fella's.
-
sorry johhno but i cant agree with you on this one.. i doubt you will be happy crusing at 110 with a 3.86:1 diff.. it will be fairly reving hey! unless you get yourself an overdrive gearbox which will make it perfect..
but the good news is 9 inch centres are easy to change yourself.. they are a banjo type diff meaning you can just unbolt it from the front pull the centre out and replace it with another.. (have to pull axels out too, and drain oil first) so id buy it put it in. see how it goes. if no good look around for another centre closer to 3.25:1.
wishing i had one of those right now.. just blew up my hwy borg diff on the weekend.. now need to get someone to change the centre for me grrrrr..
might even have to put my 9 inch in to get me out of trouble for a while.. lucky i got a spare van at the moment im running around in..
cheers
ben
-
hey benny bro, don't use the mate that has my B/W diff, still waiting after nearly 18 months or is it closer to 2 years for him to do the repair !!!
-
good idea ed!! hmmm i am so gunna have a go myself ay..
ready a post on the net about doing it yourself.. he says make sure you put everything from one diff to the next and make sure everything gets put in exactly the same way..
off to look for a borg wagner centre, 21 axel spline, LSD, borg centre, 3.5:1
hmmm wonder if im a bit to picky??
ben
-
I love this web site, I feel like I'm sitting in a pub having a beer and talking about my van.
Well I bought the diff, it's a 9" welded into a CF dual wheel base rear end, i have to pull the cover off to check the ratio, it came with four tyres, two bald and two brand new and I ended up getting a power steering rack for $300 and a pretty straight bonnet for $10 bucks aswell. Going back to pick up two machined drums some time in the future when i have some more coin. The guy was a complete gentlemen, I think I scored pretty well.
Thanks for all the advice, I might need some help to work out my ratio, Have no idea about counting crown wheel and pinion gear teeth so i'll probably have some more simple questions to follow.
cheers,
Jordan.
-
Oh and I forgot, The guy I bought the diff off suggested a turbo 450 gear box? I have no idea where this comes from? any help would be great.
cheers,
Jordan.
-
jordan what kind of steering rack have you got there? has it been converted to fit on the bedford i asume yeh? sounds fantastic!
10 bucks for a bonnet!! cant go wrong!!
are we allowed to know how much you ended up getting the diff for? always interested hehe.
turbo 450? never herd of it sorry.. but craig (hammer spanners) is organiseing me a adapter plate to run the turbo 700 gearbox behind my 202.. so i get the strength of a turbo v6 turbo 700 the overdrive gear.. and the cheapness of it also hehehe like 50 bucks off ebay!!!! how good!!!
yeh id suggest for hwy crusing youd want an overdrive transmission.. either a celica, supra, or the turbo 700 to name a few.. would e the go!
i dont count the crown wheel and pinion teeth.. thats too much effort for me anyway. but is more exact but if you knw what ratios the make came out with you can find out..
i jack up 1 wheel. spin it 2 whole turns and count the number of times the tailshaft turns. as simple as that.
if the shaft turns 3 and half times its a 3.5:1 ratio.
cheers
ben
-
hey Jordan you scored big time, well done boss,can we get a few piccy's of that steering set up before you fit it, both front back , any part #'s on it too , cheers mate... have fun! :o
Can you lads keep an eye out for me, for a Porche LHD steering rack on ebay or wherever, cheers cobbs.(have to check out the old web site for more info)
-
Hey fella's,
yea the guy that sold me the steering rack is some kind of bedofrd loving guru, seriously the nicest most knowledgable bedford guy i've ever met. I got lucky cause he went to a swap meet and wanted $500 bucks for the rack and no one bought it and I didn't have the coin when I first talked to him before he went to this swap meet to buy it. He said someone offered him $200 bucks at the meet but he told em $300 was his limit so I just offered him $300 bucks when i Picked up my diff. He told me it usually costs about $1,200 for the rack mounts to be converted to fit the bedford, considering he's been real honest so far I think that must be true?
I don't have any pics right now but i'll take some and post them up. The rack has been converted to bolt straight into a bedford and there is a sticker on it with the company that modified it and the part number they gave it, it's half scratched off but i'll take a pic and you might be able to make sense of it. A few of the copper/steel pipes are a little bent up, i'm just gonna go to a brake place and have them make some new ones.
I'll check the diff and let you know the ratio. I don't mind telling you how much i paid, i had to pay the asking price of $950, considering I got it with two new tyres and the seller turned out to be a practising member of one of the fueding bikie clubs of recent times I was pretty happy to walk away with the deal and no bruises, I started to bargain and he got pretty short and so I pulled my cash out cause I figured I was getting a good deal. It was sold through a legitamately trading company and I got a receipt so I know (or hope) it was the genuine article.
Thanks for your reply's, i'll get some pics on.
Jordan.
-
950 is still pretty reasonable if you ask me.. but 300 for power steering is flippen great dea! i would have puled out the 500 if i were there!!!!!!! fantastic bro well done..