BUGA Community
Classifieds => Wanted => Topic started by: Marishka on August 13, 2016, 08:52:52 PM
-
Wanted
Holden HQ Disk brake conversion for CF
Full setup or just caliper brackets
Cheers marty
-
Hi Marishka, I have just gone all vn. I can send you a pattern for the hq calipre bracket, its made out of either 10 or 12 mm steel plate.
-
G/day Shaginwagin ,
That would be cool in case i cant locate a setup.
Cheers
-
Hi Marishka, can you send pm with your address, so I can send a template. These pics will help with how it all goes together. 12mm plate. a few new bolts and spacers. This plate is for PBR calipres. What master cyl are you going to use. I used a HQ, but I a couple of years ago I went and bought a new HQ master cyl and it was, and the bowl was a bit higher and ity hit the bonnet, so back to old one. now have VN, on it.
-
having trouble pic size to big all 811 to 820 kb. any suggestions how to post
-
here is pic of plate, the plate on the left is HQ the one on the right is vn 1st run.
-
Hey Marty
I used a LJ torana booster w a XC falcon master
Need to widen holes in firewall a little..
But clears bonnet n stops like beast
-
Cheers for the info guys.
Marty
-
Hi Marty, have those templates arrive yet..??
Julian.
-
Hi Julian,
They came late yesterday in post.
Thanx heaps for that.
Cheers marty