BUGA Community

Technical => Driveline => Topic started by: Sundownernz on November 17, 2015, 03:33:22 PM

Title: Front Spring Insulator
Post by: Sundownernz on November 17, 2015, 03:33:22 PM

Hi all,

Does anyone know where to get either the rubber or urethane front spring insulator that sits between the bottom of the front spring and the lower suspension arm. These are pretty much unobtainable in NZ so thought you Aussie buggas might know where in Aussie they can be obtained. Be great if it's around the Sydney area as I'm over there week after next so can pick them up. The last ones I got were from Pedders in Auckland but they have since closed down.

Cheers in advance,
Garry.

Title: Re: Front Spring Insulator
Post by: VanWolf on November 18, 2015, 06:35:42 AM

Garry,

Mine were OK but I did notice that the Commodore VN that I wrecked did have similar rubbers in the rear spring housings. Do you have any sizes as an indication?

Title: Re: Front Spring Insulator
Post by: LS120 on November 20, 2015, 05:40:45 PM

are they the triangle ones or the round ones the springs sit on.

David

Title: Re: Front Spring Insulator
Post by: Sundownernz on November 25, 2015, 09:15:35 AM

The one the spring sits on. The other one is the bump stop.