BUGA Community
General Category => CF Bedford Chat => Topic started by: LS120 on February 12, 2009, 04:59:29 PM
-
ok guys i just put my 83 cf camper over the scales and just about died..
What does the campers out there weigh?? ???
my camper eas 2.44 tone with 75ltr water, awning, gen, etc... but no people in it at the time.. only cost $5.00 for the print out docket.
so whats yours weigh?
-
Mine scared me too!! 5.83T loaded without people
-
what are the laws about taking out the front center radiator brace & making it a bolt on , bolt off part?? as would make removing the motor alot better.
as far as i know it is not a major structur of the van/truck.
anyone know??
-
I think the Series 2 beddies (square nose) have that set up, someone correct me if I'm wrong
Warren
-
Warren you are correct, if you do this in the Mk 1 you need to brace each side with 2inch x 3ml flat steel runners. (for WOF reasons)
I did this on mine before I changed it to a Mk 2 front, this old photo shows the bolt holes the steel was bolted too. ( this passed WOF)
-
Hay, I'm no longer a Gumbie, but now I'm full of bog, I don't no what one is better.
-
Don't worry I know what i'm full of ;D
-
thanks Bas NZ.
looks like what i want to do... saves taking the body so high in removing the motor.
the brace steel goes behind the front bolt holes either side?? & was it welded in or not. ??
thanks
-
Don't worry I know what i'm full of ;D
So do we, and its all soft a squishy ;D