BUGA Community

Technical => Driveline => Topic started by: Postie Bob on August 06, 2014, 02:36:26 PM

Title: What hole??
Post by: Postie Bob on August 06, 2014, 02:36:26 PM

The clutch lever on my Beddy has 2 holes for the push rod thingy . See pic .   What one should be used?  Is maybe one for a hydraulic clutch?
Originally the outer hole was used . The clutch disengaged when the pedal was only just off the floor . I swapped it over and it didn`t make a whole lot of difference .  I am wondering if using the inside hole puts more strain on the cable . I can`t take the `ol girl out on the road now (  no rego & it`s jacked up for the gearbox swap ) .
Cheers, Bob.

Title: Re: What hole??
Post by: AndrewOC on August 16, 2014, 10:06:29 AM

Hi Bob,
see if you can find;
Gallery> AndrewOC> CF Supplementary Service Manual p.10 & 11
and
Gallery> AndrewOC> CF Supplementary Service Manual p.12 & 13

I haven't found your photo btw.
good luck with the clutch,
Andrew