BUGA Community
General Category => CF Bedford Chat => Topic started by: joshua on July 21, 2014, 05:53:05 PM
-
Hey guys anyone know of a way to door seals? Mine are rubbish and I cant find anywhere... Is there a profile from clarks rubber or something similar that might work....?
-
Hi Joshua,
Rare Spares have a complete kit but I would also use a pinch weld rubber on the door frame as well. Ask for some offcuts and try them first. I continued mine over the top of the frame as well. It just needed some right angle sheet metal to be attached at the top so the rubber could continue through, it has made a huge difference especially at 100 km's for noise. I have not checked if they have profiles for the actual doors.
Dave
-
Meant to say try Clark Rubber for the pinch weld for the door frames.
Dave
-
I have some spare weather strip for the outside window edge, to stop water getting in the door. Though its not cheap $38 meter. Clark do sell a good pinch weld i think is $18 meter, that works perfect for the inside to lower the wind noise on the highway.
-
Awesome dave!!!!!! Thanks so much il give that a crack... Do you just glue it down? Thanks also
Tracy I have that part under control.
-
Have not had to buy a set yet as mine are not too bad. I have only fitted the Clark Rubber pinch weld to the frame but I believe they doe glue on and from memory there were some older posts on this site re door rubbers. Maybe do a search and check those out.
Dave