BUGA Community

Classifieds => Wanted => Topic started by: mezzmo on March 16, 2014, 12:54:21 PM

Title: air cleaner bracket
Post by: mezzmo on March 16, 2014, 12:54:21 PM

Hi Guys,

In my stripping of the beddie i have misplaced my holder for the air cleaner - this is the bracket that secures the air cleaner housing to the firewall, if anyone has a spare i'd be extremely gratefull!!

cheers

mezz

Title: Re: air cleaner bracket
Post by: rumax on March 16, 2014, 06:44:20 PM

I have several in Adelaide.... ;D

Title: Re: air cleaner bracket
Post by: mezzmo on March 17, 2014, 07:14:38 AM

Is it the one for the small air cleaner? if so let me know how much you want Rumax and i'll grab one off you.

Cheers

Title: Re: air cleaner bracket
Post by: rumax on March 19, 2014, 08:41:55 AM

As long as it looks like this.... not much. donation to the cause plus postage. PM me with your address so I can post

Title: Re: air cleaner bracket
Post by: mezzmo on March 19, 2014, 11:04:54 AM

Buga, i dont think thats the one mate - my cleaner has a plate on the back with a clamp attached - the bracket is similar to yours but has a round fitting on both sides as apposed to the one in the picture which appears to only have one.

thanks anyway

Mezz

Title: Re: air cleaner bracket
Post by: rumax on March 19, 2014, 04:35:13 PM

BUGA

Title: Re: air cleaner bracket
Post by: Merlin on March 19, 2014, 08:37:26 PM

Hey Mezz I think I have one I'll try and get a pic up for you tnite

                         Cheers Merlin

Title: Re: air cleaner bracket
Post by: Sammy on March 19, 2014, 09:11:23 PM

If you have no joy I've probably got one on my Bedford you can have, its not going to be needed with a 304 :)

Title: Re: air cleaner bracket
Post by: mezzmo on March 20, 2014, 05:09:29 AM

Thanks guys, much appreciated.

Title: Re: air cleaner bracket
Post by: Postie Bob on March 20, 2014, 01:32:26 PM

If you have trouble finding the original filter element ( I did ) you can use 2 x 4cyl  Torana ones . Ryco A109 or similar .  I zip tied 2 of `em together and it works fine . It leaves about a 20mm gap between the base & cover of the filter canister but doesn`t cause any grief . Yet anyway  :) .
Anyone got a source for the original filter?  Have tried all my local blokes but no-go .
Cheers, Bob
I bunged a pic of my filter in my gallery