BUGA Community

Classifieds => Wanted => Topic started by: ShaneJ on November 12, 2012, 12:19:59 PM

Title: Radiator
Post by: ShaneJ on November 12, 2012, 12:19:59 PM

Hey everyone.

Any of you have a spare radiator? Just noticed the one in my van is past its used by  :(

Title: Re: Radiator
Post by: hammondo on November 19, 2012, 08:40:08 PM

I have one that was just re-cored and overhauled, cost me a few hundred bucks and now I don't need it with the V8 conversion. PM if interested.

Greg

Title: Re: Radiator
Post by: druid on April 20, 2013, 09:39:46 PM

I just installed a holden jackaroo v6 radiator in mine, fitted well, uses all the space and is nice and thin, bottom brackets were made using a cross bar underneath with sections of inch and a quarter gal pipe joiners (just a straight joiner with 25mm sections cut off the end) for old suspension rubbers(like the front shocky rubbers) inserted into- this makes a neat and strong holder for the radiator pins to slot into. I then welded two bits of 10mm rod at angles on either side of the bonnet catch with the gal pipe bits and rubbers on for the top radiator pins. A new ally radiator cost $270 works well and is cheap to replace and easy too!