BUGA Community

Classifieds => Wanted => Topic started by: pa pes on September 07, 2011, 11:45:17 AM

Title: Need new tail light housing for bloody roadworthy
Post by: pa pes on September 07, 2011, 11:45:17 AM: hey there,

to get my roadworthy done i'd need new tail light housing for my "78.
also i'd need a new battery tray cause mine is just full with rust

can anybody help me out?
location melbourne

cheers markus
Title: Re: Need new tail light housing for bloody roadworthy
Post by: Bedfordcrazy on September 07, 2011, 01:12:28 PM: I recon your 1st port of call should be our mate benny, he is in your neck of the woods. Short of that, try a mate of mine here in brissy, Rob @ bedford manor, almost garantee a success. Good luck mate.

george.
Title: Re: Need new tail light housing for bloody roadworthy
Post by: ben on September 07, 2011, 04:30:47 PM: ill pm you. coming through melb next week.
Title: Re: Need new tail light housing for bloody roadworthy
Post by: eddy on September 07, 2011, 09:19:05 PM: hey markus, is that a ttrrr ... ttttrrrran ..... transsssssi ..... okay I'll have to say it, kids put your hands over your ears, ....... TRANSIT !!!!! in your avator? if it is a cf part won't fit ;)
Title: Re: Need new tail light housing for bloody roadworthy
Post by: obsession on September 07, 2011, 10:46:58 PM: Quote from: eddy on September 07, 2011, 09:19:05 PM
hey markus, is that a ttrrr ... ttttrrrran ..... transsssssi ..... okay I'll have to say it, kids put your hands over your ears, ....... TRANSIT !!!!! in your avator? if it is a cf part won't fit ;)
;) I thought we had a virus ... ;D
Title: Re: Need new tail light housing for bloody roadworthy
Post by: ben on September 08, 2011, 10:42:06 AM: i just got charged $525 for a roadworthy certificate in vic!!!! they charged me per hour which i was unaware of:( be careful new beddy owners
!!

ben
Title: Re: Need new tail light housing for bloody roadworthy
Post by: Warren on September 08, 2011, 12:16:25 PM: Holly molly Ben - how may hours did they take ??

Warren
Title: Re: Need new tail light housing for bloody roadworthy
Post by: hotrod on September 08, 2011, 01:34:08 PM: Geez Ben
unless they fixed up something that was defective someone must have put the decimal point in the wrong place ;)
How long did they take cuz even letting the imagination run wild and them charging $105/hr that is five hrs to check lights wipers brakes etc ;D
Gunna come back as a mechanic 8)
Title: Re: Need new tail light housing for bloody roadworthy
Post by: rossie on September 09, 2011, 09:25:55 AM: Hey Ben, the going VACC rate for Victoria is $88 an hour, We get them for $80 trade, and do all the work our selfs ;)
Title: Re: Need new tail light housing for bloody roadworthy
Post by: ben on September 09, 2011, 04:32:04 PM: i did all the repair work myself. last time i got a roadworthy through them it cost 110bucks this time 525!!!!!!!!

there is no way i can take this matter to someone is there?

Quote
Hey Ben, the going VACC rate for Victoria is $88 an hour, We get them for $80 trade, and do all the work our selfs

they spent 5 hours i think

i then took it back with a bit of stuff changed eg. disc brake setup i changed. but that was about it.

they then did another check and failed me on the disc brake rotor being .3mm undersize.

3rd appearance he gave me roadworthy.

should i contact VACC?
Title: Re: Need new tail light housing for bloody roadworthy
Post by: rossie on September 09, 2011, 05:16:37 PM: you could try VACC or Vicroads, now they have to take photos, they'll proberbly claim it as time. But thats crap :'( :'(