BUGA Community

Classifieds => For Sale => Found for sale => Topic started by: hotrod on March 21, 2011, 01:41:01 PM

Title: made for a beddy running HQ stud pattern
Post by: hotrod on March 21, 2011, 01:41:01 PM: http://cgi.ebay.com.au/holden-14-HQ-jelly-beans-BIG-WHEELS-/260755479436?pt=AU_Car_Parts_Accessories&hash=item3cb63cdb8c (http://cgi.ebay.com.au/holden-14-HQ-jelly-beans-BIG-WHEELS-/260755479436?pt=AU_Car_Parts_Accessories&hash=item3cb63cdb8c)
Title: Re: made for a beddy running HQ stud pattern
Post by: jesus_is_alright on March 21, 2011, 06:03:08 PM: i dunno, would need a widened holden diff. I have 15x10's with a 4" dish and they only just fit on a standard width holden diff. if they're 14x11's they look like they have about a 2" dish, would hit the springs. A chev diff might fit, but i'd check the backspacing / offset before getting too excited
Title: Re: made for a beddy running HQ stud pattern
Post by: Big Camper on March 21, 2011, 06:05:22 PM: Hate to ask a really dumb Q but is there an easy way of telling what stud pattern I have? I.e easier that taking it to a wheel joint and asking?
Title: Re: made for a beddy running HQ stud pattern
Post by: BusyKiwi on March 21, 2011, 06:26:47 PM: measure across the wheel studs, on a 5 stud measure across studs 1 and 3, this is the poor mans PCD. I think HQ holden was 120mm
Title: Re: made for a beddy running HQ stud pattern
Post by: jesus_is_alright on March 21, 2011, 09:10:46 PM: Holden HQ is 4.75" or 120.6mm
Holden commodore is 120mm
Ford is 4.5"
Beddy is 6" (which you could tell from a photo because its huge)
Title: Re: made for a beddy running HQ stud pattern
Post by: ben on March 22, 2011, 07:16:43 AM: thats cheap hotrod. but the offset is no deeper for the back than the front. do your sums before you buy them:)
Title: Re: made for a beddy running HQ stud pattern
Post by: aka5000 on March 22, 2011, 12:56:22 PM: You could move the rear springs inward
Title: Re: made for a beddy running HQ stud pattern
Post by: ben on March 22, 2011, 01:51:30 PM: that would supposed to be engineered thou:(
Title: Re: made for a beddy running HQ stud pattern
Post by: Rothu on May 26, 2011, 06:42:53 PM: There are a set of bedford stud pattern jelly bean mags at Centre Road Wreckers in springvale. I think they wanted $400 for the set of 5.