BUGA Community

Classifieds => For Sale => Topic started by: LS120 on November 13, 2010, 06:56:44 AM

Title: cresta Diff gears
Post by: LS120 on November 13, 2010, 06:56:44 AM: ok people i have my old bedford diff head with the cresta Gears inside all ok just needs new pinion bearing..

have had a holden put in & now dont need it.

it's in NZ sorry guys... but if you want it i can strip out the gears and send over..

i'm looking at about $200. nz + P&P

PM me if you are inturested

thanks
David
Title: Re: cresta Diff gears
Post by: ben on November 13, 2010, 12:02:16 PM: what ratio are the gears fella?
Title: Re: cresta Diff gears
Post by: LS120 on November 13, 2010, 07:32:17 PM: 3.1:1 or 3.2:1 from memory...
Title: Re: cresta Diff gears
Post by: Jeff on November 13, 2010, 09:21:16 PM: Are there different ratios?
My Cresta diff is 3.5something to one....or is that 3.4something?
Title: Re: cresta Diff gears
Post by: LS120 on November 14, 2010, 12:41:28 PM: yes there was.. one was for the Automatics & the other for the Manuals
Title: Re: cresta Diff gears
Post by: Bas NZ on November 14, 2010, 04:14:00 PM: Manuals were 3.9 Autos 3.5............
Title: Re: cresta Diff gears
Post by: LS120 on November 15, 2010, 02:41:28 PM: mine was a 3.5 then....

have someone looking at diff at the moment.. also have the drive shaft & 4 speed bedford gearbox & box member with re-modled gear stick, has the 202/186 bellhousing attached (has clutch,pressure plate, folk & bearing), also have a bedford front cross member setup for a 202/186.

also have my old 2.3lt bedford motor in good order just needs a water pump.

also have a 2.3lt front cross member with good rubber isolators & locator plates.

have about 8 dash board plastic circuit boards in hand & also some petrol, water gauges, have speedo's in kmh but long arm broken( easy fix to glue something on to it ).